Technical Parameters 开关型技术参数
Connection standard 连接标准
|
ISO5211 F03、F05
|
Output axis specification
输出轴规格
|
Female octagonal 9*9 or 11*11
|
Maximum working pressure
最大介质压力
|
1.5MPa
|
Rated voltage 额定电压
|
DC12V; DC24V ; AC24V ;DC12-24V ;AC110-230v (Optional )
|
Wiring diagram 接线图
|
CR201;CR202;CR301;CR303;CR306;CR501;CR502;CR702;CR703;CR706 (Optional)
|
Life time 寿命
|
70000 times（testing pressure is 0.4MPa, medium is water）
|
Actuator material 执行器材质
|
Engineering Plastics PPO
|
Torque force 扭力
|
15 N.m
|
Cable Length 线长
|
0.5m;1.5m (Optional )
|
Environment temperature
环境温度
|
-15℃～60℃
|
Liquid temperature 液体温度
|
2℃～90℃
|
Manual operation 手动操作
|
Yes
|
Open/close indicator 开关指示
|
Yes
|
Protection class 防护等级
|
IP67
|
Company quality management system 公司认证
|
ISO 9001:2015
|
model specification and main performance parameters(Testing pressure is 0.4MPa, Medium is water)
Wiring diagram
|
otation
|
Open/ close time
|
Rated current（A）
|
Power(W)
|
Number of manual turns
| ||
AC 24V
|
DC 12V
|
DC 24V
| |||||
201/501
|
90°
|
≤11
|
/
|
<30W
|
8
| ||
202/502
|
＜0.78
|
＜1
|
＜0.5
| ||||
301/702
|
＜0.3
|
＜0.4
|
＜0.2
| ||||
303/703
|
＜0.3
|
＜0.42
|
＜0.2
| ||||
306/706
|
＜0.78
|
＜1
|
＜0.5
| ||||
A150 turn on/off type 2 way assembly diagram
A150 turn on/off type 3 way assembly diagram
Wiring diagram Turn on/off type
CR201（2 wires control）
·RD connect with positive, the BK connect with negative, the valve closed, the actuator automatically power off after in place , the valve remains fully closed position .
·BK connect with positive, the RD connect with negative, the valve open, the actuator automatically power off after in place, the valve remains fully open position .
﹡Suitable Working Voltage: DC12V, DC24V
﹡Exceeding the working voltage is forbidden
CR501（5 wires control，with feedback wire）
1. RD connect with positive, the BK connect with negative，the valve closed, the actuator automatically power off after in place .
2 BK connect with positive, the RD connect with negative，the valve open, the actuator automatically power off after in place .
4. GR & WT are connect when the valve open fully, YW & WT are connect when the valve closed fully
Suitable Working Voltage：DC12V, DC24V
Exceeding the working voltage is forbidden
Feedback wire capacity:
1. Voltage: DC0-35v; 2. Maximum current: 0.4A
Feedback wire capacity:
1. Voltage: DC0-35v; 2. Maximum current: 0.4A
CR202 (2 wires control--- Reset function, Normally closed or normally open）
·When SW is closed , the valve open. the actuator automatically power off after in place
·When SW is open, the valve closed, the actuator automatically power off after in place
﹡Suitable Working Voltage: AC24V，DC12-24V, AC110-230v
﹡Suitable Working Voltage: AC24V，DC12-24V, AC110-230v
﹡Exceeding the working voltage is forbidden
Please Note A150 CR202 must need charge time >1 minute for every time use
Please Note A150 CR202 must need charge time >1 minute for every time use
CR502 ( 5 wires control，Reset function，With feedback signal)
·When SW is closed , the valve open. the actuator automatically power off after in place
·When SW is open, the valve closed, the actuator automatically power off after in place
﹡GR & WT are connect when the valve open fully, YW & WT are connect when the valve closed fully
﹡Suitable Working Voltage: AC24V，DC12-24V, AC110-230v
﹡Exceeding the working voltage is forbidden
Feedback wire capacity:
1. Voltage: DC0-35v; 2. Maximum current: 0.4A
Please Note A150 CR202 must need charge time >1 minute for every time use
1. Voltage: DC0-35v; 2. Maximum current: 0.4A
Please Note A150 CR202 must need charge time >1 minute for every time use
contact person:yoyo zhang
Taizhou Tonhe Flow Control Co.,
LtdNO.3 building,Xinshun SME pioneer
park,Jiangkou street, Huangyan,Taizhou 318020,Zhejiang,China
Mobile:
+86-18957612187
Skype: meizi2661
没有评论:
发表评论